2.2kW Side Channel Blower 3 Phase | 2GH 610-H16 High Pressure Ring Blower for CNC & Aeration

The 2GH 610-H16 Side Channel Blower is a robust 2.2kW (3HP) industrial air mover designed for continuous duty. Also known as a Regenerative Blower or Ring Blower, this unit delivers a powerful maximum airflow of 265 m³/h with a vacuum capability of -235 mbar. It is the ideal solution for industrial applications requiring high pressure and vacuum with low maintenance needs.

Model: 2GH 610-H16 Phase: 3 Phase

· 100% Oil-Free: Contact-free impeller design ensures the discharged air is clean and oil-free.

· Maintenance Free: Utilizing sealed SKF/NSK bearings tailored for high-speed operation, extending service life.

· Dual Frequency: Wide voltage motor (50Hz/60Hz) works globally without modification.

· Low Noise Level: Integrated silencers reduce operating noise, suitable for indoor factories.

· Durability: Rugged die-cast aluminum housing dissipates heat effectively and resists corrosion.

• Aquaculture: Oxygen aeration for fish ponds and shrimp farming.
  
  
• CNC Machines: Vacuum hold-down tables for woodworking and routing.
  
  
• Water Treatment: Wastewater aeration and agitation.
  
  
• Pneumatic Conveying: Transporting plastic granules, wheat, or powders.
  
  
• Industrial Drying: Air knife drying systems.

Q: How do I choose the right side channel blower model? 

A: The selection depends on your specific application requirements for Airflow (Volume) and Pressure (or Vacuum).

• For applications needing high air volume but lower pressure (e.g., pond aeration), choose our Single Stage models (like the 2GH 410 or 610 series).

• For applications needing high pressure/vacuum (e.g., deep water aeration or heavy lifting), consider our Double Stage models (like the 2GH 720 or 920 series). You can check the performance curves in our datasheet or contact our engineering team for free sizing assistance.

Q: What is the difference between Single Stage and Double Stage blowers? 

A: The main difference lies in the number of impellers and internal compression capability.

• Single Stage : Has one impeller. It provides higher airflow but moderate pressure. Best for general ventilation and drying.

• Double Stage : Has two impellers. The air is compressed twice, resulting in nearly double the pressure capability compared to single-stage models of the same power, though with slightly lower airflow. Ideal for pneumatic conveying and wastewater treatment.

Q: Do 2GH side channel blowers require oil for lubrication?

A: No. Our 2GH series blowers are 100% oil-free. They utilize a contactless impeller design, meaning there is no friction between moving parts within the housing. The bearings are permanently sealed and lubricated (SKF/NSK), making the unit virtually maintenance-free and ensuring the discharged air is clean and free of contaminants.

Q: Can these blowers operate on both 50Hz and 60Hz?

A: Yes. Our standard motors are equipped with Wide Voltage / Dual Frequency capabilities (IP54 protection). For example, a 3-phase blower rated for 380V/50Hz can often also operate at 440V/60Hz (please refer to the specific nameplate data). We also offer both Single Phase and Three Phase options to suit different power supplies globally.